کارت Diva V-PRI/T1-24 از شرکت Dialogic
کارت : Diva V-PRI/T1-24
اتصال : PCI و PCI EXPRESS
تعداد پورت : 24 پورت
نحوه اتصال : T1
سيستم عامل :
Linux – all distributions
Windows Server 2003
Windows Server 2008
Windows Vista
Windows XP
مشخصات فنی :
Voice resources 0 (-CTI), 8 (-8), 24 (V-, UM-PRI/T1-24), 30 (V-, UM-, PRI/E1-30)
Fax resources 0 (-CTI), 8 (-8), 12/15 (UM-PRI/T1-24 / E1-30), 30 (PRI/E1-30)
Conferencing resources 0 (-CTI), 8 (-8), 24 (V-, UM-PRI/T1-24), 30 (V-, UM-, PRI/E1-30)
Maximum boards/system 8 (tested by Dialogic); more than 8 are possible — depends on the application
CSP Yes
Form factor Low Profile: -CTI PCIe; Half Size: -CTI, -8 PCI; Full Size: V-, UM-PRI/T1-24 / V-, UM-, PRI/E1-30 PCI/PCIe
Resource bus PCI rev 2.2 up to 66 MHz or PCI Express 1.0a x1 lane (3.3/12 V)
Connection 1 RJ-45 connector
Network interface E1/T1 and ISDN PRI (Primary Rate Interface) in TE and NT Mode
Signaling ETSI, NI-1, 4ESS, 5ESS, and all major ISDN protocols; QSIG; and many more
Operating system Windows® and Linux. Details at http://www.dialogic.com/systemreleases
Volts PCI: 5; PCI Express: 3.3 and 12
Required accessories 1 shielded RJ-45/RJ-45 cable
Hardware
• 32-bit RISC CPU, 300 MHz
• 2 (0)*, 10 (8)*, 24 (23/24)* or 31 (30/31)* DSPs (32.76 MHz and 65 MIPS)
(*) The number in brackets states the number of available channels with DSP processing per board
• Onboard SDRAM Memory: 64 MB
• Telephony interface:
— 1 x RJ-45, no RJ-45/RJ-45 cable supplied
• Physical dimensions:
— PRI/E1/T1-CTI PCIe: 167.65 mm x 68.90 mm (PCB)
— PRI/E1/T1-CTI PCIe: 181.38 mm x 80.06 mm (with low profile bracket)
— PRI/E1/T1-CTI PCIe: 180.96 mm x 120.88 mm (with standard bracket)
— PRI/E1/T1-CTI PCI, PRI/E1/T1-8 PCI: 174.63 mm x 106.68 mm (PCB)
— PRI/E1/T1-CTI PCI, PRI/E1/T1-8 PCI: 187.84 mm x 126.37 mm (with bracket)
— V-, UM-, PRI/E1-30 / T1-24 PCI/PCIe: 312.00 mm x 111.15 mm (PCB)
— V-, UM-, PRI/E1-30 / T1-24 PCI/PCIe: 325.31 mm x 126.31 mm (with bracket)
— V-, UM-, PRI/E1-30 / T1-24 PCI/PCIe: 352.17 mm x 126.31 mm (with bracket and retainer)
• High-impedance mode for passive monitoring
• I/O addresses, memory, and interrupt allocated automatically
• Plug-and-play interface
• PCI: PCI 2.2, up to 66 MHz, 32 bit (also supports 64 bit dual address cycle DMA), 5 V supply required, 3.3 V, or 5 V universal signaling, supported in
backwards compatible PCI-X slots
• Production quality: ISO 9002
Power Consumption and Environmental
• Power consumption:
— PRI/E1/T1-CTI PCI: 0.58A @ +5 V (typical)
— PRI/E1/T1-CTI PCIe: 0.96A @ +3.3 V and 0.04A @ 12 V (typical)
— PRI/E1/T1-8 PCI: 0.65A @ +5 V (typical)
— V-, UM-, PRI/E1-30 / T1-24 PCI: 0.97A @ +5 V (typical)
— V-, UM-, PRI/E1-30 / T1-24 PCIe: 2.3A @ +3.3 V and 0.03A @ 12 V (typical)
• Operating temperature: 10°C to 50°C
• Storage temperature: 0°C to 70°C
• Maximum tolerance in voltage fluctuation: According to the respective PCI or PCI Express specification
Dialogic® Diva® System Release Software, Dialogic® Diva® SDK Software and Dialogic® Diva® SIPcontrol™ Software
• Supported operating systems: Windows® and Linux. Details at http://www.dialogic.com/systemreleases
• M-adapter feature (patent pending): Combined Virtual Adapter, Internal Call Transfer, Explicit Call Transfer Emulation
• SNMP support:
— Windows®: v2c
— Linux: Net-SNMP v1, v2c and v3
• Application interfaces (provided by Dialogic Diva System Release Software and Dialogic Diva SDK):
— Microsoft®: Diva API, Diva API for .NET, Diva Component API (VB.NET), COM Port, WAN Miniport, TAPI, CAPI 2.0, extended CAPI, VoIP (SIP/RTP)
— Linux: Diva API, TTY, CAPI 2.0, extended CAPI, VoIP (SIP/RTP)
• Dialogic Diva SIPcontrol Software: VoIP and FoIP (T.38) Gateway Software. For up to 2 channels per system, the licenses are free of charge. If more
than 2 channels are required, licenses can be ordered from Dialogic. Diva SIPcontrol Software can be downloaded from http://www.dialogic.com.
Features – Signaling
• DSS1 (Euro-ISDN), NI-1 (North America National ISDN 1), 5ESS (North America), 1TR6 (Germany), INS Net 64 (Japan), VN3 (France), CT1 (Belgium),
QSIG
• Call progress analysis:
— Busy tone detection
— Ring back tone detection
— Special Information Tone (SIT) detection
— Fax/modem detection
— Dial tone detection
• ISDN supplementary services:
— Number identification services (CLIP, CLIR, COLP, COLR, KEY, MSN, DDI, SUB)
— Call offering services (TP, CFU, CFB, CFNR)
— Call completion services (CW, HOLD, ECT)
— Charging services (AoC)
— Three-party conference
— Large conference
Features – Media Processing
NOTE: Not for Dialogic® Diva® PRI/E1/T1-CTI Media Board, only on 8 channels for the Dialogic® Diva® PRI/E1/T1-8 Media Board
• Voice and speech:
— G.711 coding (A-law, μ-law selectable)
— DTMF detection, generation, clamping, and filtering
— Generic tone detection and generation
— Pulse tone detection
— Full-duplex voice, barge-in
— Voice Activity Detection (VAD)
— Silence detection
— Human talker detection
— Recording Automatic Gain Control (AGC)
— Pitch control
— Audio tap
— G.168 echo cancellation, up to 128 ms tail length
• Voice over IP (VoIP):
— G.711 voice coder (64 kbps, μ-law, A-law)
— G.726 voice coder (32 kbps)
— G.729 voice coder (VoIP licenses required)
— GSM voice coder (13 kbps)
— Adaptive jitter buffer
— Voice Activity Detection (VAD)
— Comfort Noise Generation (CNG)
— Real-time Transport Protocol (RTP) framing
— G.168 echo cancellation, up to 128 ms tail length
• Switching and conferencing:
— Onboard and cross-board switching and (large) conferencing via line interconnect (call tromboning)
— Automatic Gain Control (AGC)
• Support for Fax class 1 and 2 (UM- and Universal-Series only)
• Support for Fax Group 3, T.30 (UM- and Universal-Series only):
— V.17, V.29, V.27ter, V.21, V.34 modulation
— Fax polling/ fax on demand
— Up to 33.6 kbps with each channel (send and receive)
— Page formats: ISO A4, B4, A3
— Fax compression MH, MR, MMR
— Error Correction Mode (ECM)
— Standard, fine, super-fine and ultra-fine resolution
— Color fax (JPEG-format)
• Support for FoIP, T.38, when using Diva SIPcontrol Software (UM- and Universal-Series only):
— Up to 33.6 kbps with each channel (send and receive)
• Data modem (Remote Access, POS and other Low Bit Rate (LBR) applications) (UM- and Universal-Series only):
— V.21, V.22, V.22bis, Bell 103, Bell 212A, V.32, V.32bis, V.34, V.42, V.42bis, V.90, MNP4, MNP5
— Modem with extension: V.18, V.21, Bell 103, V.23, EDT, Baudot45/47/50 incl. DTMF, V.42, V.42bis
— B-channel protocols: Transparent HDLC, Transparent Voice, Synchronous PPP and MLPPP, X.75 (LAPB), X.75/V.42bis, LAPD, T.90NL, T.70NL, X.25,
X.31, Rate adaption (56 kbps), PIAFS 1.0 / 2.0, SDLC
